I finally took some time out to print my first project. In searching for my letterpress, I knew I eventually wanted to give thanks to those who have helped me along the way, so this first card is dedicated to a certain handful of individuals. Though there are still a few supplies I would like to acquire, I committed myself to printing a thank you card using the moveable type I received from Tooknap Press and a little vintage army tank dingbat I scored on eBay.

COLOR FORMULA

Even though this was my first print job, and I had not yet attempted a 2-color piece, I was up for the challenge. I knew ahead of time that I wanted the colors on this card to consist of army green and olive drab. I started the process by mixing my inks following the Pantone formula breakdown. A little ink goes a long way with letterpress, so as a test, I kept my color portions small.

LOCKED AND READY

I had originally locked up my type, tank and stars together, before realizing the need to be adventurous and attempt a 2-color job. I knew registering the artwork without proper gauge pins was going to be a challenge, but I was up for it. I was forced to improvise. I disassembled the chase as you see it here, and broke it down into two separate passes. I printed the bold type first, then the army tank together with the stars.

TANK YOU!

Through trial and error, here is the final result. Some of the challenges I faced were figuring out how to properly pack my press, mixing and laying the proper amount of ink on the ink disc, and registering multi-colored elements. I also realized that I wasn’t thrilled with the quoins and key I currently have, and could use a second chase to have ready to go.

I’ve been pretty bad with sending out thank you cards in the past, and now, I have no excuse.